Monday, January 14, 2013

Tenorio-Tagle, G.; Rozyczka, M.; Bodenheimer, P. ; The hydrodynamics of superstructures produced by multi-supernova explosions

The hydrodynamics of superstructures produced by multi-supernova explosions
by: Tenorio-Tagle, G.; Rozyczka, M.; Bodenheimer, P.
[ADS: 1990A&A...237..207T, pdf, first author: personal site, second, third]
This is an important historical paper from 1990. The motivation behind this paper goes back several years before this when astronomers were considering the effect that supernovas in OB regions (regions with type O and B stars) would have on the ISM and the general shape and structure of the galactic disk (see references in the introduction for history, VERY important!!! as in I will use these references in my dissertation).

A single supernova will ionize a section of the ISM and will create a small bubble with a well defined boundary and interior and exterior properties. If we consider multiple supernovas then our region begins to become much bigger. At some point the radius of the bubble exceeds the scale height of the galactic disk, thus we are no longer considering a series of blasts in a uniform medium. We now have a stratified medium with a gravitational potential. This changes the properties of the blast region and greatly affects the shape, internal structure and characteristics of the superbubble. There is still a sharp boundary for the region and this transition is termed a "supershell" (Heiles 1979, 1984). The formation of this structure is very important as it is linked to the formation of molecular clouds, which in turn collapse and form stars, thus feeding star formation in a galaxy.

In this paper the authors do 2D simulations of a stratified disk and vary a number of parameters to see how much energy is needed to achieve blow out (i.e. at what point does a bubble become a superbubble). The different parameters tested are summed up in their first table. All units are cgs.

For the density distribution the tried an exponential fall off (exp. 1 and 2), uniform, Gaussian distribution and a composite. Each one is defined in the paper. They also looked at the effect of a hot halo placed on top of the disk and how that changed the blow out.

What is interesting is that the basic structure of the ISM determines the shape and strength of the blow out. Also the velocity of the escaping gas is strongly constrained by the ISM. In the end these superstructures can readily be created by OB complexes and it is assumed that they can persist for many millions of years. The blow out can create a metal rich fountain that when it rains back down on the galaxy will fuel metal rich star formation.

They reference two papers by Mac Low (and others) who were working on this problem at the same time. I may review those papers next. They are: Mac Low and McCray 1988, and Mac Low, McCray and Norman 1989.

Papers Cited:
Heiles, C.; 1979, ApJ, 229, 533-537, 539-544.
Heiles, C.; 1984, ApJS, 55, 585-595.
Mac Low, M.-M. & McCray, R.; 1988 ApJ, 324, 776-785.
Mac Low, M.-M., McCray, R. & Norman, M. L.; 1989, ApJ, 337, 141-154.

Saturday, January 12, 2013

J. R. Dawson ; The Supershell-Molecular Cloud Connection: Large-Scale Stellar Feedback and the Formation of the Molecular ISM

The Supershell-Molecular Cloud Connection:
Large-Scale Stellar Feedback and the Formation of the Molecular ISM
by: J. R. Dawson
[arXiv:1301.1419 [astro-ph.GA], pdf, first author: personal site]
This is a review paper on most of the current major papers dealing with how molecular clouds form. It is a good reference paper for me to use. A number of the major papers that he cites are ones that I have seen before. She cites five of Fabian Heitsch's papers (my advisor) and a few from Mordecai-Mark Mac Low (Fabian's advisor). So this is a review of many of the papers that are similar to things that I am doing.

The basic purpose of the paper is to review the current state of simulations and observations of molecular clouds in their natural habitat, the ISM. It tries to address the fundamental question, "How, when and where do we form molecular clouds." The problem with molecular clouds is that in order for them to form is that you need sufficient density and column density to shield the cloud from UV radiation that will ionize the cloud and destroy any molecules that form. Any significant heating will also destroy the cloud and prevent it from achieving densities high enough to allow for gravitational collapse.

The current review is focused on how large scale stellar feedback can contribute to the formation and evolution of molecular clouds. In other words how can O and B type stars contribute to an environment that is conducive for the formation and survival of molecular clouds. The idea is that the OB regions will form a super bubble in the galaxy which will form shell walls of gas that has been swept up and compressed by the strong stellar winds. These shells will rapidly cool, and along with hydrodynamics (and magnetohydrodynamics!) and thermal instabilities will cause the shell walls to collapse and form molecular clouds. The interest is in modeling these effects, and also trying to model the interacting flows at the shell boundaries where the molecular clouds actually form.

There are two possible processes for the formation of molecular clouds. The first is through global gravitational collapse of the the galactic disk. This model requires significant inflows of matter from outside the galaxy, usually from the halo or galactic neighborhood. This is where high velocity clouds come in and play a role. Also galactic fountains can be placed in this process, but galactic fountains can also be part of the second process. The second process is from the shocks and turbulence inherent in the galactic disk from gas flows, and star formation. This paper focuses on the second process.

The general idea can be summed up from the first figure in the paper:
In order to have the blow out as shown in figure 1 there needs to be enough energy from the OB region to push its way out of the galactic disk. There region will sweep up gas from the ISM and will form a shell wall. The question is, what are the characteristics of this wall? And do molecular clouds form there (Section 3), or are they formed elsewhere (Section 4) and are caught up in the wall?

The question of how much energy is needed to cause a blow out depends heavily on the ISM and where the OB region is located and how strong it is. He cites Mac Low et al. 1989 and Tenorio-Tagle et al. 1990 (also see Tenorio-Tagle et al. 1990) on this one. These supershells are defined to have formation energies of E ≥ 1052 erg. If there is a blow out then the ejected material will supply the halo with metal rich material and more energy.

Here are the section headings and subsection headings for sections 3 and 4, with a brief explanation of what is in the sections. These are the sections that cover modeling and are the sections that I am currently most interested in.

3 Molecular Cloud Formation in Supershells: Theory & Modelling
3.1 Molecule Formation & Destruction
This section covers the conditions that are needed for molecules to survive. We need to know under what conditions molecules can survive in order to constrain our models. This deals with the strength of the UV field that will cause dissociation and ionization.

3.2 Gravitational Instability of Expanding Shells
This section covers the question of at what point will the shell begin to collapse gravitationally. There are conditions that affect whether or not a shell can collapse, such as the strength of the supernovas or OB stars that create the shell. If there is too much energy then the shell will be too hot for collapse. Farther away the shell may begin to collapse, but this is dependent on the ISM and the speed of the shell. Even still there may not be enough time for the shell to collapse before the proto molecular clouds fragment (the fragmentation timescale is shorter than the collapse timescale).

3.3 Molecular Cloud Formation in Colliding Flows
If you have two interacting flows (i.e. two shells raming into each other) then there may be favorable conditions to form molecular clouds. This model relies on thermal instabilities and turbulence to form molecular clouds. The thermal instabilities rely on an interesting property of the pressure density relation of cooling gas. The role of magnetic fields is still being investigated in all of this.

3.4 Whole-Disk Models of the Feedback Structured ISM
These models look at how certain gas structures are formed by having large scale simulations of the entire disk. Dawson includes a figure from Hill et al. (2012). The third author on the paper is Mordecai-Mark Mac Low. I spoke to Mordecai-Mark last year about this paper when he visited UNC last year. He was able to give me some pointers about how to fix my own problems because they had run into the exact same problems in their simulations. As in I was talking to him and I said, "This is what I am working on, but I am having some problems." and he said, "And you are getting negative temperatures under these conditions. We had the same problem so we hired a math PhD to fix the problem. This is what we did ..."

4 Pre-Existing Molecular Clouds
4.1 Cloud Disruption
This section looks into the conditions associated with the shells and how they interact with a non-homogeneous ISM. This is critical for the survival, growth collapse of pre-existing molecular clouds.

Section 5 looks into observations being made of the Milky Way and of near neighbors (Large and Small Magellanic clouds). By mapping the CO and H2 in reference to star forming regions we can get a sense of whether or not molecular clouds form inside the shells or form outside the shells and are caught up in them as they sweep by. Also we can look at column densities, structure and expected life span of the clouds. Dawson has done a number of observations of these supershells and her work will be interesting to look into. I may review some of her papers in the future.

Papers Cited:

Hill, A. S., Joung, M. R., Mac Low, M.-M., Benjamin, R. A., Ha ner, L. M., Klingenberg, C., & Waagan, K. 2012, ApJ, 750, 104

Mac Low, M., McCray, R., & Norman, M. L. 1989, ApJ, 337, 141

Tenorio-Tagle, G., Rozyczka, M., & Bodenheimer, P. 1990, A&A, 237, 207


Wednesday, January 9, 2013

The Purpose of This Blog

I decided to start this blog as a way to force myself to cover the published (or soon to be published) literature of my field of study. I have my personal blog that I update from time to time that I use to post mostly about stuff that is not related to my research. Because I know that I need to keep up on recent literature I plan on trying to pick one paper a week and read/skim and give a brief summary of the points that stuck out to me.

This is not intended to be a comprehensive review of the literature, nor is it supposed to cover the best or most important papers. I select my papers by looking at the title/abstract and saying, "Hey that looks interesting!" or, "I should look at that paper and find out what they are doing." I may also review a paper that was discussed in my research group meeting, or in some other random meeting. In other words, there is no real method or intent other than I need to keep up on recent goings on in my field. I will try to do one paper a week, but if that doesn't happen...meh.

My sources will generally come from arXiv (or from ADS for older papers), usually from recent posts on the following categories/subcategories:
The name of the blog comes from my online name Quantumleap42 which, with a little bit of imagination, can be thought of a first name, "Quantum", a middle name, "leap" and a last name "42". Thus the name of the blog is Quantum Musing, as in, Quantum is musing.